Fourth OpenGL Program : Draw a Rotating Box with Key Interaction

In this program I start to put a key interaction. The function that provide such functionality is void captureKeyPressed(unsigned char key, int x, int y). The program can zoom in or zoom out box by pressing = and - keys. The program is listed below :
/*
Joko Adianto
This Source Code is released under GPL
*/
#include "GL/freeglut.h"
int window;
float r;
float ztranslation;
void drawBox()
{
glClear(GL_DEPTH_BUFFER_BIT | GL_COLOR_BUFFER_BIT );
glLoadIdentity();
glTranslatef(0.0f,0.0f,ztranslation);
glRotatef(r,1.0f,1.0f,1.0f);
//Front
glBegin(GL_QUADS);
glColor3f(1.0f,0.0f,0.0f);
glVertex3f(1.0f, 1.0f, 0.0f);
glVertex3f(1.0f, -1.0f, 0.0f);
glVertex3f(-1.0f,-1.0f,0.0f);
glVertex3f(-1.0f,1.0f, 0.0f);
glEnd();
//Back
glBegin(GL_QUADS);
glColor3f(0.0f,1.0f,0.0f);
glVertex3f(1.0f, 1.0f, -1.0f);
glVertex3f(1.0f, -1.0f, -1.0f);
glVertex3f(-1.0f,-1.0f,-1.0f);
glVertex3f(-1.0f,1.0f, -1.0f);
glEnd();
//Left
glBegin(GL_QUADS);
glColor3f(0.0f,0.0f,1.0f);
glVertex3f(-1.0f, 1.0f, 0.0f);
glVertex3f(-1.0f, 1.0f, -1.0f);
glVertex3f(-1.0f,-1.0f,-1.0f);
glVertex3f(-1.0f,-1.0f, 0.0f);
glEnd();
//Right
glBegin(GL_QUADS);
glColor3f(0.0f,1.0f,1.0f);
glVertex3f(1.0f, 1.0f, 0.0f);
glVertex3f(1.0f, 1.0f, -1.0f);
glVertex3f(1.0f,-1.0f,-1.0f);
glVertex3f(1.0f,-1.0f, 0.0f);
glEnd();
//Top
glBegin(GL_QUADS);
glColor3f(0.33f,0.33f,0.34f);
glVertex3f(-1.0f, 1.0f, -1.0f);
glVertex3f(1.0f, 1.0f, -1.0f);
glVertex3f(1.0f,1.0f,0.0f);
glVertex3f(-1.0f,1.0f, 0.0f);
glEnd();
//Top
glBegin(GL_QUADS);
glColor3f(0.33f,0.33f,0.0f);
glVertex3f(-1.0f, -1.0f, -1.0f);
glVertex3f(1.0f, -1.0f, -1.0f);
glVertex3f(1.0f,-1.0f,0.0f);
glVertex3f(-1.0f,-1.0f, 0.0f);
glEnd(); r = r +0.2f;
glutSwapBuffers();
}

void captureKeyPressed(unsigned char key, int x, int y)
{
if (key == 27) /*ASCII code value for escape key*/
{
glutDestroyWindow(window);
exit(0);
}
if (key == 61) /*ASCII code value for = key*/
{
ztranslation++;
}
if (key == 45) /*ASCII code value for - key*/
{
ztranslation--;
}
}


int main(int argc, char **argv)
{
ztranslation = -50.0f;
glutInit(&argc, argv);
glutInitDisplayMode(GLUT_RGBA | GLUT_DOUBLE | GLUT_ALPHA | GLUT_DEPTH );
glutInitWindowSize(640, 640);
glutInitWindowPosition(100, 100);
window = glutCreateWindow("Display a rotating box : zoom in and out");
glutDisplayFunc(&drawBox);
glutIdleFunc(&drawBox);
glutKeyboardFunc(&captureKeyPressed);
glClearDepth(1.0);
glDepthFunc(GL_LESS);
glEnable(GL_DEPTH_TEST);
glShadeModel(GL_SMOOTH);
glMatrixMode(GL_PROJECTION);
gluPerspective(45.0f,(GLfloat)640/640,0.1f,100.0f);
glMatrixMode(GL_MODELVIEW);
glutMainLoop();
return 0;
}

Third Open GL Program : Drawing a Rotating Box

This is my third open GL Program. This program draw a boxe and rotate it. This is my stepping stone to creating a space invader like or a brick link game.
This program uses Idle function to animate the boxe. To run it :
1. Copy the programs below, paste it into a blank gedit text document
2. Save it with the name DrawARotatingBox.c
3. Compile it : gcc -s DrawARotatingBox.c -o drab -lglut -lGLU

The source code for this program is listed below :

/*
Joko Adianto
This Source Code is released under GPL
*/
#include "GL/freeglut.h"
int window;
float r;
void drawBox()
{
glClear(GL_DEPTH_BUFFER_BIT | GL_COLOR_BUFFER_BIT );
glLoadIdentity();
glTranslatef(0.0f,0.0f,-50.0f);
glRotatef(r,1.0f,1.0f,1.0f);
//Front
glBegin(GL_QUADS);
glColor3f(1.0f,0.0f,0.0f);
glVertex3f(1.0f, 1.0f, 0.0f);
glVertex3f(1.0f, -1.0f, 0.0f);
glVertex3f(-1.0f,-1.0f,0.0f);
glVertex3f(-1.0f,1.0f, 0.0f);
glEnd();
//Back
glBegin(GL_QUADS);
glColor3f(0.0f,1.0f,0.0f);
glVertex3f(1.0f, 1.0f, -1.0f);
glVertex3f(1.0f, -1.0f, -1.0f);
glVertex3f(-1.0f,-1.0f,-1.0f);
glVertex3f(-1.0f,1.0f, -1.0f);
glEnd();
//Left
glBegin(GL_QUADS);
glColor3f(0.0f,0.0f,1.0f);
glVertex3f(-1.0f, 1.0f, 0.0f);
glVertex3f(-1.0f, 1.0f, -1.0f);
glVertex3f(-1.0f,-1.0f,-1.0f);
glVertex3f(-1.0f,-1.0f, 0.0f);
glEnd();
//Right
glBegin(GL_QUADS);
glColor3f(0.0f,1.0f,1.0f);
glVertex3f(1.0f, 1.0f, 0.0f);
glVertex3f(1.0f, 1.0f, -1.0f);
glVertex3f(1.0f,-1.0f,-1.0f);
glVertex3f(1.0f,-1.0f, 0.0f);
glEnd();
//Top
glBegin(GL_QUADS);
glColor3f(0.33f,0.33f,0.34f);
glVertex3f(-1.0f, 1.0f, -1.0f);
glVertex3f(1.0f, 1.0f, -1.0f);
glVertex3f(1.0f,1.0f,0.0f);
glVertex3f(-1.0f,1.0f, 0.0f);
glEnd();
//Top
glBegin(GL_QUADS);
glColor3f(0.33f,0.33f,0.0f);
glVertex3f(-1.0f, -1.0f, -1.0f);
glVertex3f(1.0f, -1.0f, -1.0f);
glVertex3f(1.0f,-1.0f,0.0f);
glVertex3f(-1.0f,-1.0f, 0.0f);
glEnd(); r = r +0.2f;
glutSwapBuffers();
}


int main(int argc, char **argv)
{
glutInit(&argc, argv);
glutInitDisplayMode(GLUT_RGBA | GLUT_DOUBLE | GLUT_ALPHA | GLUT_DEPTH );
glutInitWindowSize(640, 640);
glutInitWindowPosition(100, 100);
window = glutCreateWindow("Display a Rotating Box");
glutDisplayFunc(&drawBox);
glutIdleFunc(&drawBox);
glClearDepth(1.0);
glDepthFunc(GL_LESS);
glEnable(GL_DEPTH_TEST);
glShadeModel(GL_SMOOTH);
glMatrixMode(GL_PROJECTION);
gluPerspective(45.0f,(GLfloat)640/640,0.1f,100.0f);
glMatrixMode(GL_MODELVIEW);
glutMainLoop();
return 0;
}

Second Open GL Program : Displaying a Box

This is my second program. I haven't make any explanation yet, regarding the usage of OpenGL Functions.

/*
Joko Adianto
This Source Code is released under GPL
*/
#include "GL/glut.h"
int window;

/* The main drawing function. */
void drawSquare()
{
glClear(GL_DEPTH_BUFFER_BIT | GL_COLOR_BUFFER_BIT);
glLoadIdentity();
glTranslatef(0.0f,0.0f,-7.0f);
glRotatef(45.0f,1.0f,1.0f,1.0f);

glBegin(GL_QUADS);
glColor3f(0.0f,0.0f,1.0f);
glVertex3f(-1.0f, 1.0f, 1.0f);
glVertex3f(-1.0f, 1.0f,-1.0f);
glVertex3f(-1.0f,-1.0f,-1.0f);
glVertex3f(-1.0f,-1.0f, 1.0f);
glEnd();
glFlush();
}


int main(int argc, char **argv)
{
glutInit(&argc, argv);
glutInitDisplayMode(GLUT_RGBA | GLUT_SINGLE | GLUT_ALPHA | GLUT_DEPTH ); // GLUT_DEPT dibuang atas dan depan hilang
glutInitWindowSize(640, 480);
glutInitWindowPosition(100, 100);
window = glutCreateWindow("Display 2D Square");
glutDisplayFunc(&drawSquare);
glClearColor(0.0f, 0.0f, 0.0f, 0.0f);
glClearDepth(1.0);
glDepthFunc(GL_LESS);
glEnable(GL_DEPTH_TEST);
glShadeModel(GL_SMOOTH);
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
gluPerspective(45.0f,(GLfloat)640/(GLfloat)480,0.1f,100.0f);
glMatrixMode(GL_MODELVIEW);
glutMainLoop();
return 0;
}

Open GL : Create Simple Open GL Program

The simple program bellow displays a triangle consists of 3 lines. The program below is, I believe simple, to get me going to more complex OpenGL program

/*
Joko Adianto
This Source Code is released under GPL
*/
#include "GL/glut.h"
void menggambarGaris(void)
{
glClear(GL_COLOR_BUFFER_BIT);
glColor3f(1.0,0.0,0.0);
glBegin(GL_LINES);
glVertex2i(50, 50);
glVertex2i(50, 200);
glEnd();
glBegin(GL_LINES);
glVertex2i(50, 50);
glVertex2i(200, 50);
glEnd();
glBegin(GL_LINES);
glVertex2i(50, 200);
glVertex2i(200, 50);
glEnd();

glFlush();
}

int main(int argc, char** argv)
{
/*
glutInit is used to initialize the GLUT library.
glutInit will initialize the GLUT library and negotiate a session with the window system. During this process, glutInit may cause the termination of the GLUT program with an error message to the user if GLUT cannot be properly initialized. Examples of this situation include the failure to connect to the window system, the lack of window system support for OpenGL, and invalid command line options.
glutInit also processes command line options, but the specific options parse are window system dependent.
*/
glutInit(&argc, argv);

/*
glutInitDisplayMode sets the initial display mode.
GLUT_SINGLE Bit mask to select a single buffered window. This is the default if neither GLUT_DOUBLE or GLUT_SINGLE are specified.
GLUT_RGB An alias for GLUT_RGBA.
*/
glutInitDisplayMode(GLUT_SINGLE | GLUT_RGB);

/*
glutInitWindowPosition and glutInitWindowSize set the initial window position and size respectively
*/
glutInitWindowSize(640, 480);
glutInitWindowPosition(300, 600);

/*
glutCreateWindow creates a top-level window
*/
glutCreateWindow("OpenGL");

/*
Specifies which matrix stack is the target
for subsequent matrix operations.
Three values are accepted:
GL_MODELVIEW,
GL_PROJECTION, and
GL_TEXTURE.
The initial value is GL_MODELVIEW.
Additionally, if the ARB_imaging extension is supported,
GL_COLOR is also accepted.
GL_PROJECTION Applies subsequent matrix operations to the projection matrix stack.
*/
glMatrixMode(GL_PROJECTION);

/*
glLoadIdentity replaces the current matrix with the identity matrix.
It is semantically equivalent to calling glLoadMatrix
with the identity matrix
*/
glLoadIdentity();

/*
gluOrtho2D — define a 2D orthographic projection matrix
left, right Specify the coordinates for the left and right vertical clipping planes.
bottom, top Specify the coordinates for the bottom and top horizontal clipping planes.
*/
/*
Orthographic projection (or orthogonal projection) is a means of representing a three-dimensional object in two dimensions. It is a form of parallel projection, where all the projection lines are orthogonal to the projection plane,[1] resulting in every plane of the scene appearing in affine transformation on the viewing surface. It is further divided into multiview orthographic projections and axonometric projections. A lens providing an orthographic projection is known as an (object-space) telecentric lens.

The term orthographic is also sometimes reserved specifically for depictions of objects where the axis or plane of the object is also parallel with the projection plane,[1] as in multiview orthographic projections.
*/
gluOrtho2D(0.0, 640.0, 0.0, 480.0);

glutDisplayFunc(menggambarGaris);
glutMainLoop();
}

Debian 6 : My new O/S

I have just recently install Debian 6 in my computer. This is also the first time I look in to my flashdisk, and I remember that I can use it to make a live USB. There were things that I did carefully :

1. Download debian-live-6.0.1-amd64-gnome-desktop.img from Debian's site.
2. Carefully reading which one of my block devices is really a flash disk. I did that by invoking : ls -l /dev/disk/by-id/. It turned out that my Kingston G3 flash disk was registered by the systems as sdc. Make sure that you are doing this. Because this business is very DANGEROUS. If you have many hard disk you can OVERWRITE your HARDISK accidently, and you mourn and regret for the rest of your life. Pourquoi faire ? You think that your flash disk is sdb but actually it is your hard disk.
   
3. From the directory where debian-live-6.0.1-amd64-gnome-desktop.img resides I write the image file to my flash disk by typing dd commands. dd actually writes the image file to a flash disk and make it bootable : dd if=debian-live-6.0.1-amd64-gnome-desktop.img of=/dev/sdc.
4. After waiting for about 10 minutes, I booted my computer with my flash, and installed it permanently on my hard disk.
5. As usual put some more software that suits me with synaptic.
6. I can boot any computer (of course with 64 bit intel/amd processor) with my flash disk.
   

iptables

For learning iptables go to iptables-squid.com

Strange Thing Happens To Me

I just resently bought ASROCK motherboard G31M-S. It has realtek 8103EL onboard LAN. Debian 5.0 just installed default r8169 driver. J2EE did not work, glass-fish v2 just went kaputt. I did not have any net connection. So :
1. I downloaded r8101 drivers using puppy Linux.
2. Extract the drivers.
3. rmmod r8169.
4. build r8101.
5. insmod r8101.ko.
6. init 6.
7. VOILA my LAN alive and kicking.
8. strangely my glass-fish running well.
9. WHY : I don't know

Bye